how to install a countertop > Page 1
Do It Yourself: How To Install A Countertop - 2
...7. Set your clothing iron to medium heat so that you can apply your laminate caps. If it buts an end you will want to apply sealant to the end of the counter and then screw it on. If it butts a wall you will want to attach a square corner and splash with screws. 8. Make any cutouts you have to such as where the sink will go or the taps. Make sure your follow the appliance manufacturer's installation instructions. Usually your cutouts are done after the countertop is in place. But sometimes it is done prior to install. 9. Now you'll join the L and U shaped tops and apply a bead of sealant where the two sections butt up. Use bolts to join the two pieces. Use your rubber mallet to tap align the two pieces. Once the bolts are sucked tight and the sections are aligned you'll apply your sealant. 10. Position the counter up against the wall so that it is hanging over the front edge of the cabinet. Make sure it is equal all along. Set a scriber to the widest gap from the backsplash and the wall. 11. Put the metal point against the wall and the pencil on the top. Now move the pencil along the wall and make a parallel line. 12. Use your block plane or belt sander to remove the scribe edge. 13. Apply a bead of sealant along the backsplash. 14. Reinstall all your fixtures and appliances. It's easier to get all your plumbing and faucets for the sink in place prior to dropping the sink into place. If you are installing a cook top put head conduct aluminum tape along the edge. That's it. As you can see, having accurate information that you can use is crucial at times when you are remodeling. We want you to be successful, and that is why we have informed you about how to install a countertop. Sometimes you just cant get enough good information about countertops.
Related Articles
Bathroom Counter Tops - What To Look For
You can get a nostalgic look to your bathroom with wooden counter
tops. Imagine the beauty, the elegance, and the opportunity of having a wooden
counter top. These are usually sanded down, glazed, and finished to make sure
that you do not get hurt by splinters or loose pieces of wood. This can be hi...
Countertops - What You Should Know
We'll help you understand the different manufacturer's too - Whether
Corian or Formica or Silestone is for you. Find out what DuPont and Samsung
have to do with countertops. Stick around a bit and find out where to get the
best pricing, the pros and cons of different countertop materials, and ho...
|
